Cutters are used in pairs to machine two opposite sides of the job at the same time

The cutters used for the operation should be kept in match pair

Different diameter cutters are used depending upon the profile of the job

Since the diameter of cutters is the same, the peripheral speed will be the same

Burr on arbor taper causes eccentric running of cutter

Play in the spindle bearing of a milling machine gives rough finish to the machined surface

'T' slots are provided on the milling machine table for clamping a workpiece or work holding devices

Machine vice is used to hold workpiece directly on the milling machine table

Hardness, toughness and resistance to wear

Hardness, brittleness and resistance to wear

Hardness, softness and resistance to wear

Hardness, flexible and resistance to wear

Cast iron and plastic

High speed steel and carbides

Mild steel and stainless steel

Carbon steel and nickel steel

Generally slitting saws are keyed with the arbor

Slitting saws are used with normal speed and feed like other cutters

In a 45 Degree single angle cutter, 45 Degree is the angle between the axis of the cutter and the slant cutting edge

Dovetail guideways can be milled by using a shank type single angle cutter