www.McqFinder.in

Home
MCQ
Search
Free Apps
Important
Study Groups
Contact Us
Policy

Home
MCQ
Objective Questions
ITI
Machinist
Machinist Set-1
Milling
56

Milling MCQ - Machinist(Set-1) with Answers

56) In a spur gear, if outside diameter = 300 mm; module = 5 mm, the number of teeth will be :

85 teeth

60 teeth

58 teeth

29 teeth

Answer is:

58 teeth

In a spur gear, if outside diameter = 300 mm; module = 5 mm, the number of teeth will be :

Milling MCQ - Machinist(Set-1) with Answers

For more MCQ's Click Here

Related Milling MCQ - Machinist(Set-1) with Answers

57) In a spur gear, if pitch diameter = 40 mm; outside diameter = 48 mm, module = 4 mm, the number of teeth will be :

10 teeth

20 teeth

30 teeth

40 teeth

Answer is:

10 teeth

In a spur gear, if pitch diameter = 40 mm; outside diameter = 48 mm, module = 4 mm, the number of teeth will be :

58) In a spur gear, if module = 4 mm, the tooth height will be :

4.67 mm

5.67 mm

6.67 mm

8.67 mm

Answer is:

8.67 mm

In a spur gear, if module = 4 mm, the tooth height will be :

59) Which one of the following is an advantage of down cut milling when compared with up cut milling ?

Can be used for milling cast iron

Feed drive can have a backlash

There are no restriction for using this milling method

Suitable for milling thin metal plates

Answer is:

Suitable for milling thin metal plates

60) Which one of the following is an advantage of up cut milling ?

Backlash eliminator is not required

Downward pressure during milling is high

Cutter wear is less

Suitable for milling thin plates

Answer is:

Backlash eliminator is not required

Milling MCQ - Machinist(Set-1) with Answers

For more MCQ's Click Here