A compass points north because all magnets have two poles , a north pole and a south pole, and the north pole of one magnet is attracted to the south pole of another magnet. (You may have seen this demonstrated by a pair of simple bar magnets or refrigerator magnets pushed end to end.) The Earth is a magnet that can interact with other magnets in this way, so the north end of a compass magnet is drawn to align with the Earth's magnetic field. Because the Earth's magnetic North Pole attracts the "north" ends of other magnets, it is technically the "South Pole" of our planet's magnetic field.
3) A magnetic compass always points
North
Related ISRO Technician-B Fitter Question Paper - 2016 (Set - 1) with Answer Key
1000 kg per cubic meter
Water has its maximum density of 1g/cubic centimeter at 4 degrees Celsius. When the temperature changes from either greater or less than 4 degrees, the density will become less then 1 g/cubic centimeter. Water has the maximum density of 1 g/cubic centimeter only when it is pure water.
Au
Gold is a chemical element with symbol Au and atomic number 79, making it one of the higher atomic number elements that occur naturally. In its purest form, it is a bright, slightly reddish yellow, dense, soft, malleable, and ductile metal.
Zinc
Galvanization or galvanizing is the process of applying a protective zinc coating to steel or iron, to prevent rusting. The most common method is hot-dip galvanizing, in which the parts are submerged in a bath of molten zinc.
Lead and Tin
Soldering is a process in which two or more metal items are joined together by melting and flowing a filler metal into the joint, the filler metal having a relatively low melting point. Solder is an alloy of 50% Lead & 50% Tin.
Soldering is distinguished from brazing by use of a lower melting-temperature filler metal; it is distinguished from welding by the base metals not being melted during the joining process. In a soldering process, heat is applied to the parts to be joined, causing the solder to melt and be drawn into the joint by capillary action and to bond to the materials to be joined by wetting action. After the metal cools, the resulting joints are not as strong as the base metal, but have adequate strength, electrical conductivity, and water-tightness for many uses.